detail information
| Posted by | Jan S. |
| Posted on | 14/01/06 12:53 |
| Number of views | 9777 |
DVD+R DL at 10x:



The Plextor PX-755A uses P-CAV (Partial-Constant Angular Velocity) to write DVD+R DL at 10x. The average speed is 8.57x and total writing time is 14:26 minutes.

The BenQ DW1655 did not like this Plextor burned media, as we also see that 26.619 PO-Failures was reported and the quality score 0. Let us try to scan this Plextor burned media with some other drives:

Much better, the Lite-On reported some high spikes here and there together with some high spikes at the layer change. The quality score is 64.

| Drive Info | ID:0 PLEXTOR DVDR PX-755A V1.00 (#006916) | ||||||||||||||||||||||
| Test Settings | Read Speed: | 2X CLV | |||||||||||||||||||||
| Test Interval Length: | Middle Accuracy | ||||||||||||||||||||||
| Test Result | Disc Info: | CDS_TEST_B2 DVD-ROM, 8152 MB (CDS_TEST_B2) | |||||||||||||||||||||
| |||||||||||||||||||||||
| Test Duration | 0:19:32 | ||||||||||||||||||||||

| Drive Info | ID:0 PLEXTOR DVDR PX-755A V1.00 (#006916) | ||||||||||||||||||||||
| Test Settings | Read Speed: | 3-8X CAV | |||||||||||||||||||||
| Test Interval Length: | Middle Accuracy | ||||||||||||||||||||||
| Test Result | Disc Info: | CDS_TEST_B2 DVD-ROM, 8152 MB (CDS_TEST_B2) | |||||||||||||||||||||
| |||||||||||||||||||||||
| Test Duration | 0:20:22 | ||||||||||||||||||||||
No problems found or reported while using Plextools and the Plextor PX-755A on the Verbatim DVD+R DL 8x burned at 10x.
But let us try another disc at 10x:

Some slowdowns, compared to the first result.

The scan above shows a high spike just after the layer change, but should not cause any serious problems.
DVD+R DL at 8x:



The Plextor PX-755A uses P-CAV (Partial-Constant Angular Velocity) to write DVD+R DL at 8x. The average speed is 7.08x and total writing time is 17 minutes and 16 seconds. (The average speed and total writing time could have been better, since our test-drive slowed down the writing speed at some points).

Above, a Nero CD-DVD Speed Disc Quality scan and we can see the disc got a Quality score of 93.
DVD+R DL at 6x:



The Plextor PX-755A uses CLV (Constant Linear Velocity) to write DVD+R DL at 6x. The average speed is 5.96x and total writing time is 18 minutes and 54 seconds.

Due to the PIF spike shortly after the layer break the disc got a quality score of 70.
DVD-R DL at 6x:



The Plextor PX-755A uses CLV, (Constant Linear Velocity) to write DVD-R DL at 6x. This gives an average writing speed of 5.92x, and a writing time of 18 minutes and 46 seconds.

The Verbatim 4x DVD-R DL disc burned at 6x got a quality score of 92.
DVD-R DL at 4x:



The Plextor PX-755A uses CLV, (Constant Linear Velocity) to write DVD-R DL at 4x. This gives an average writing speed of 3.98x, and a writing time of 27 minutes and 10 seconds.

The Traxdata 4x DVD-R DL disc burned at 4x got a quality score of 73.
Head over to the next page for the conclusion….

Will be curious about the upcoming 760...


Thanks for the preview Jan, looks like a good drive to me.




Writing performance
Conclusion
add a tag