Forumdetail information
| Posted by | Herbert |
| Posted on | 09/07/08 19:32 |
DVD-R media compatibility and write quality:
In In these tests we will be using a Lite-On LH-20A1P with firmware KL0N along with CD-Speed to measure the disc quality. We will also be using the same drive along with CD-Speed for our read-back tests.
|
Brand: |
Taiyo Yuden Tuffcoat with Watershield – Thanks to Primera Europe for sending us this media. |
|
Manufacturer: |
Taiyo Yuden |
|
Code: |
TYG03 |
|
Disc Type: |
DVD-R |
|
Capacity: |
4483MB |
|
Certified Speed: |
16x |
|
Write Speed: |
8x (Z-CLV 2 Zones) |
|
Write Time: |
13m:79s |
|
PI-8 errors Average/Sec: |
5.70 |
|
PI-1 failures (PIF) Avg/Sec: |
0.02 |
|
Jitter average |
11.43% |
In best case we can rate this result average. If we consider that the disc was only burned at 8x speed then we must say that the result is bad.
|
Brand: |
Verbatim Glossy Printable |
|
Manufacturer: |
Mitsubishi Chemical Corporation |
|
Code: |
MCC 03RG20 (made in Taiwan) |
|
Disc Type: |
DVD-R |
|
Capacity: |
4483MB |
|
Certified Speed: |
16x |
|
Write Speed: |
8x (CAV) |
|
Write Time: |
9m:09s |
|
PI-8 errors Average/Sec: |
1.88 |
|
PI-1 failures (PIF) Avg/Sec: |
0.00 |
|
Jitter average |
8.78% |
A very good result for a high quality media.
|
Brand: |
BenQ printable - Thanks to xmediatrade.com for sending us this media |
|
Manufacturer: |
Daxon |
|
Code: |
Daxon016S |
|
Disc Type: |
DVD-R |
|
Capacity: |
4483MB |
|
Certified Speed: |
16x |
|
Write Speed: |
8x (Z-CLV 2 Zones) |
|
Write Time: |
9m:09s |
|
PI-8 errors Average/Sec: |
1.80 |
|
PI-1 failures (PIF) Avg/Sec: |
0.01 |
|
Jitter average |
10.66% |
A good result but high jitter.
Summary:
The Primera Disc Publisher SE Blu writing quality with our tested DVD-R media was good.
Now let’s summarize our test results on the next page …
DVD+R and DVD+R DL Writing Quality
add a tag
