CDFreaks Poll
An upscaling DVD player is worth the money?
Yes, my DVD movies look better
No, DVD quality is good enough
I don't buy content on discs anymore, downloads baby!
No, Blu-ray is the future
Based on 474 ratings

detail information

Posted by Jan S.
Posted on 19/09/06 21:04
Number of views 53679
Menu
Advanced tests
 

To round off this review, we will run some advanced tests on the Samsung SH-S182D. These tests are: 'Sheep Test", protected audio discs and some special disc tests.

The 'Sheep Test":


 For this test, we will use the Sheep tests made by Alexander Noé. Why is it called sheep test? That's because the logo of the first 1 to 1 copy program called CloneCD is a sheep. When looking at supported writers, you will notice that the feature list has sheep to indicate if a feature is supported or not. In this case we are interested in the writer's ability to backup/write weak sectors. Also called: 'Correct EFM encoding of regular bit-patterns".

  • No sheep: Can't backup any Safedisc 2 versions without the help of software tricks
  • 1 Sheep: Can backup Safedisc 2 up to version 2.4x without software tricks
  • 2 Sheep: Can backup Safedisc 2, including version 2.5x
  • 3 Sheep: Can write all possible weak sectors, few if any writers could do this.

One of our forum moderators Womble, has written a guide concerning the 'Sheep Test" that can be found here.

In the screenshot below taken from CloneCD, we see the Samsung SH-S182D supports everything.

The Samsung SH-S182D supports DAO-RAW recording mode, which basically means, it can write uncorrected data and sub-channel data.

Sheep Tests

Reader:
JLMS
XJ-HD166s

One Sheep Burner
SD2OLD

Yes

Two Sheep Burner
SD251

Yes

Safedisc v2.90
SD290

Yes

Three Sheep Burner
SHEEP3

No

As we can see from the table the Samsung SH-S182D is a 'Two Sheep Burner", in addition it also managed to copy the Safedisc V2.90 test. It could not manage the Sheep3 test though

 

Copy protected Audio:


For our protected audio test, we used the Exact Audio Copy program. We inserted the protected audio discs and if the drive was able to recognize the disc we tried to extract the music tracks to the hard drive. First let us look at the discs we had available for this test: 

Celine Dion: A New Day Has Come; protected with key2audio version 3.

 

Herbert Gé¶nemeyer: Mensch - This disc is protected with Cactus Datashield 200.0.4 .3(build 12b)

And Michelle: Leben!; protected with Cactus Datashield 200.5.1.91 - 5.10.090.

Results:

Protected
Audio

Protection version

Exact Audio Copy

Celine Dion:
A new day has come

Key2Audio version 3

Detects and rips the content

Herbert Gé¶nemeyer:
Mensch

Cactus Datashield 200

Detects and rips the content

Michelle:
Leben!

Cactus Datashield 200

Detects and rips the content

 

Overburning:


To test the overburning capabilities of the Samsung SH-S182D, we used the over-burning test in Nero CD/DVD-Speed.

CD-R:

For this test we used an Infiniti Professional Compax 99min/900mb CD-R. (Thanks to Medea International (UK) for providing the disc).

According to Nero CD/DVD speed the drive can overburn to 102 minute and 35 seconds. However we set the overburn capacity down to around 100 minutes and turned on the overburn function is Nero CD/DVD Speed:

To test if the Samsung SH-S182D is capable to read overburned CD-Rs, we used a 99:57 minutes CD-R:

As we can see from the picture above the Samsung SH-S182D had no problems reading the 99:57 minutes CD-R.

DVD+R:

We also tried to overburn a DVD+R media:

According to Nero CD-DVD Speed the Samsung SH-S182D can not overburn DVD+R media.

DVD-R:

According to Nero CD-DVD Speed the Samsung SH-S182D can not overburn DVD-R media.

 

This concludes our Samsung SH-S182D review, let us head on to the last page to read our conclusion…

Want to submit your own review? Click here
Reactions on this item
Hello!
I have this Samsung product and I'm dealing with a serious problem:

One of the features listed is: "The Samsung SH-S182D supports bit-setting, and is capable of writing DVD+R, DVD+RW and DVD+R DL media with DVD-ROM book type."

Well, the one I have in my computer CAN'T do this!!!

I open Nero Burning ROM, go to "Choose recorder", as it is shown in this review, and for my surprise the option "Book type settings" at the bottom of the dialog box DOESN'T EXIST!

Only the optons "Super link enabled" and "DVD high compatibility mode" are there! How is this possible?

If someone here have any ideas about my problem, I'd be very glad! Just e-mail me: danielcl_colorado@yahoo.com.br.

Thanks! :c
:( have same writer does anydody know why DL discS are showing as CDs.....tried 3 different makes of discs no joy
I have the SH-S182F model which I think is basically the same. It is a great drive so far. It can read discs well and does excellent burns. Seems like they teamed up with Toshiba because the retail box says "Toshiba Samsung Storage Technology Corporation", abbreviated "TSST". Made in Korea. (Thank God it's not made in China)

I am just curious why it causes the hard drive LED to light up continuously when watching a DVD movie. My previous Lite-On didn't cause the hard drive LED to light up at all.

The movie plays fine though. Anyone know why this is? Thanks in advance. :)
I have a serious problem with the samsung sh-s182d it cannot read its own burn cds and dvds and it shows many of cds or dvds as a blank disc. Somebody please help me and if possible please send the solution to my mail i.e azmath_85@hotmail.com.
Thanks,this is a very good review on this burner!
I have the SH-S182F model which I think it's the same as this one, does anyone knows if it's possible to bitset to DVD-ROM? If you know how please write me to jcma90@gmail.com :)
I have the SH-S182D model too and it takes about 4 hours 15 mins to encode and burn a normal length movie .. my old burner never took this long .. whats up with that ? :c
Mine is gawdawful SLOW... It didn't use to be so bad. I am not sure what happened. I've got the latest FW, reinstalled all the samsung magic speed and all, it's set to dma mode, I don't know what else to do. It's not too picky about discs and the burns usually come out good but now it's taking like half hour 45 mins to rip a DVD9 and about half an hour to burn one, AFTER encoding. It's f'n ridiculous. Burns CD fine, full disc like 2.5 mins... DVDs fuggetaboudit...
Any ideas???
Mine is starting to act the same way. Burning DVD at at various speed sometime at .84X! :-( - Unbelievable! I did upgrade firmware ver SB05 but no help.
Advises are appreciated.
An
I have the same problem. I bought 3 of this type SH-S182D, from one provider. It reads nice, but always burns DVD`s very slow. It`s stable after upgraded firmware to SB04. But it always takes 1 hour and 8m to burn a dvd. Have tried both +/- different machines, Linux/XP, DMA, 80 conductor cables, etc. So now I don`t know what to do. Maybe drop Samsung and buy other brand? Or maybe its my PC`s?
I fixed the problem with slow DVD burn described in the post above!

"Posted by ragnar (guest) on Saturday 22 March 2008 23:17
I have the same problem. I bought 3 of this type SH-S182D, from one provider. It reads nice, but always burns DVD`s very slow. It`s stable after upgraded firmware to SB04. But it always takes 1 hour and 8m to burn a dvd. Have tried both +/- different machines, Linux/XP, DMA, 80 conductor cables, etc. So now I don`t know what to do. Maybe drop Samsung and buy other brand? Or maybe its my PC`s?"


I didn`t know about the firmware upgrade SB06, I thought the SB04 was the newest. I upgraded firmware from S04 to S06. And that fixed the problem!!! I now burn a DVD 4574510KB (4468GB) in 8min 47sec!!!! Finally!

Here is the link to the firmware upgrade file SB06:

http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=us&CttFileID=1528503&CDCttType=FM&ModelType=N&ModelName=SH-S182D&VPath=FM/200706/20070622093010250_SH-S182D_SB06.zip
Or click here for page:
http://www.samsung.com/us/support/download/supportDownDetail.do?group=computersperipherals&type=opticaldiscdrives&subtype=dvdwriter&model_nm=SH-S182D&language=&cate_type=all&mType=FM&dType=D&vType=R&cttID=1528503&prd_ia_cd=05050500&disp_nm=SH-S182D


Good luck with your Samsung product!


:g
I have the exct same drive in black
just upgraded the firmwae from SB04 to SB06

theve changed the method of upgrading firmware, unfortunately the batch of softwares they used to have for this drive have been removed from their site.
they were pretty usefull, like disk speed adjuster and stuff

Iv just recently encounted defection on my drive, probably due to neglecting the button and slamming the tray shut all the time.
so now it pops the disk out randomly.

abotu ppl getting the they insert as CD, if u are using nero adn is your 1st time, sellect the drive as TSST corp SH-S182D

when selecting to burn, on the bottom right corner sellect the size of ur disk, dvd5 or 9

usualy nero 8 detects this automaticaly
Why doesnt the LED light come on my SH-S182D? It works perfectly otherwise?
What do you think? Leave your comments!

Your message
:) :( ;) :r :d :B :X :c :o :g :+ :p :* :S

Your name
Your e-mail


Type in the code

Don't like to type in this code? Please register or login.
Related tags
A tag is a relevant keyword or term associated with or assigned to a piece of information (like picture, product, or video clip), thus describing the item and enabling keyword-based classification of information it is applied to. We use it to make searching our database easier and enable all our users to contribute to our database.

Add related tags
CD Freaks allows items to be tagged with objective specifications, no opinions or subjective descriptions. When your start typing our system will suggest tags, if this is what you mean, please use these first. Our system will also check for spelling mistakes and correct them to keep our database consistent. Finally tags are moderated by our team members.

    Related reviews/articles
    Get the latest reviews via RSS RSS