Writing performance DVD-RAM:

The Samsung SH-S183A supports writing and reading the DVD-RAM format. Lets us look at the recording side of the disc, and as you can see it has differences from the other DVD+R/W/R9 DL and DVD-R/W discs.

We can see a very fascinating pattern of darker spots. These tick marks are "address information" ("Pre-mastered Pit Header Field") which are embedded onto the disc. This is header information in front of data sector area, and is the same format as HDD and MO.

A DVD-RAM’s disc can be formatted in the following formats:

• FAT32
• UDF 1.02
• UDF 1.50
• UDF 2.00
• UDF 2.01
• UDF 2.50

By formatting a DVD-RAM disc with FAT32 it will act like a removable hard drive and all writing will be done as “background processes”. Meaning you do not have to wait for it to finish, you can start or work with other applications while the DVD-RAM is working without noticing any “hangs” or CPU slowdowns.

DVD-RAM has error correction, but also has error replacement to spare sectors as a "defect management" function. This gives higher reliability than other DVD format.

Another advantage with DVD-RAM is that the discs can be formatted/erased/written at over 100.000 times before it will/can cause/report any errors.

Lets us take a look at the media we are going to use in these tests:

Now let’s see how DVD-RAM media is written and read by the Samsung SH-S183A:

Maxell 12x at 12x with “Streaming” option

As we can see, the Samsung SH-S183A wrote our 12x DVD-RAM media at its maximum rated speed of 12x in 5 minutes and 53 seconds.

Let’s try to read back the disc that we wrote:

As we can see, the Samsung SH-S183A used a P-CAV reading method, and reads the disc at its rated write speed, meaning our 12x media was read at 12x.

Next you can read the conclusion from our tests…

Writing performance DVD±R DL

Conclusion