detail information
| Posted by | Dennis |
| Posted on | 05/04/02 19:19 |
In this part of our TEAC CD-W540E review we'll test how fast the drive can write different media (CD-R's and CD-RW's). Of course we tested every disc afterwards if errors had occurred. We used a 700MB avi-file and used Nero Burning Rom to write this file in DAO (Disc At Once) mode. In the table below we've summed it all up for you:

We tested all CD-R discs for readability and all disc could be read fine. The only problem we had making this list is that 40x certified media isn't widely yet available... If we could get our hands on some of these CD-R's we would have of course included their write times and write speeds.
Conclusion:
In conclusion all tested media could be written at their certified speed but most of the times even faster. The biggest surprise were the 'Traxdata' CD-R's manufactured by Prodisc Technology. They could be written at 40x while they were only certified up to 16x writing.
To conclude our review we will take a look at how far the TEAC CD-W540E can overburn and if it can handle 8cm CD-R's...

I also want it!!!
Great review, hopefully my next review(whenever that will be....) will also reach this quality level, although I have my doubts about that.



How is it possible that the included Feurio 1.63 and 1.64 support Teac540E?
Is there any way to support this writer under Feurio already?
How many DAE speeds has to choose?
Noisy?
It seems my next writer.


The noise the drive produces is not too much but don't think it'll be quiet
What can you expect with 40x writing and 48x reading?
Thanks for the compliments guys
Oh and ps: sorry OC... 




Also the warranty period of two years is only available in Europe correct?


:4


How noisy is it compared to say the 24x plex or 24x lite-on? [both are
reportedly "quiet" and
I guess vibration free].
I'm considering all 3 of these drives. I'm also going to a 1-drive soln for read and write to save a slot for something else. [I don't care about 48x read - infact I'd prefer a quieter and slower reader]
Main desire is "quality writing" for data. I'm even planning to run it "below max speed" to help out with quality burns.
Main concern on the TEAC is that its claimed to be noisy. And maybe it also vibrates [most vibrate when they are noisy] which could lead to write errors.
Neg: on the lite-on is reading no-perfect CDs is a problem. and maybe it does not last as long as the plex and teac.
neg: on plex [no gaming safe disc >2.5]
All of these drives are
within 30 bucks of each
other. So considering w/o regard to cost which would you get. It seems the 40x teac has the blood-line to give better 40x burns, but I don't care about "speed, rather quality" and would downshift to lower speeds.
Vibration free is highly desired.


========
sorry that should have read
but I don't care about "speed" that effects "quality" and would probably downshift to lower speeds for important backups.
Thanks.


If you don't care about maximum speeds and you want a drive that's not too noisy I would say go for the Plextor PX-W2410A. If you want a drive that's fast, reliable and produces quality at every write speed go for the TEAC. It will however by noisier than the 24x writers of course.
The vibration of the TEAC drive is no more than 24x writers and 32x writers if you have properly attached the drive.


i gotta get a 2nd JoB to Keep up with you guyz!
-Peace & Love



Just bought Teac 24X. Should I have waited for 40X? Does CloneCD support both? Thanks.

Can't wait to use these two products together as they both seem outstanding....


I think the Nero dl is buggy. I dl'd v5.5.7.2 for my 24X. Records OK but now get sys lockup when using the Wave Editor. Try uninstalling & reinstalling Nero 5.5, then dl 5.5.8.2 again. Good luck.


It didn't read copy-protected audio-cd's at all.I'll return the unit and go for the Plextor 40x instead.I have already returned on W540,because it started to return my cd's in small pieces.Crap!!

Is TEAC CD-RW drive model CD-W540E provided with an digital/SPDIF output, besides normal analog one? On the left side of the analog audio output connector from the back panel is another one named "Strap S1". Is this connector for digital/SPDIF output? In the manual it says that S1 is "factory reserved"!? Anyone tried it?

CD-RW Tests
add a tag